5305-01-335-7073 SCREW,CLOSE TOLERANCE Index 5305-01-335-7075 SCREW,TAPPING

National Stock Number:
5305-01-335-7074

Federal Supply Class:
5305

National Item Identification Number:
013357074

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.


Manufacturer Information:
868197-006006481NORTHROP GRUMMAN SYSTEMS CORPORATION
868197-006013973LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION
868197-6006481NORTHROP GRUMMAN SYSTEMS CORPORATION
868197-6013973LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION
868197-006017446HUCK INTERNATIONAL, INC
868197-006058794FASTENER TECHNOLOGY CORP
FT1056-60A58794FASTENER TECHNOLOGY CORP
FSC7900-6-D-4.597928HUCK INTL INC


Techincal Specification:
FASTENER LENGTH0.922 INCHES MINIMUM AND 0.952 INCHES MAXIMUM
HEAD DIAMETER0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD HEIGHT0.097 INCHES NOMINAL
HEAD STYLEKNURLED NO. 2
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MATERIAL ACCOMMODATED THICKNESS0.126 INCHES MINIMUM AND 0.157 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-23195 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER
MATERIALSTEEL COMP 302 SPRING
MATERIALSTEEL COMP 301 SECONDARY WASHER
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 FASTENER
MATERIALSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 PRIMARY WASHER
MATERIALSTEEL COMP 304 STAND-OFF
NOMINAL THREAD DIAMETER0.138 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
SURFACE TREATMENTOXIDE FASTENER
SURFACE TREATMENTOXIDE SECONDARY WASHER
SURFACE TREATMENTOXIDE PRIMARY WASHER
SURFACE TREATMENTOXIDE STAND-OFF
SURFACE TREATMENTPASSIVATE SPRING
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.170 INCHES MINIMUM AND 0.200 INCHES MAXIMUM
THREAD CLASS2A
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH32


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us