|
|
|
National Stock Number:
5305-01-337-5966
Federal Supply Class:
5305
National Item Identification Number:
013375966
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| HT359RNE3-9 | 03950 | NAVAL INVENTORY CONTROL POINT MECHANICSBURG | | HT359RNE3-9 | 73197 | HI-SHEAR CORPORATION | | HT359RNE3-9 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.909 INCHES MINIMUM AND 0.956 INCHES MAXIMUM | | FEATURES PROVIDED | O RING | | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | HEAD DIAMETER | 0.350 INCHES MINIMUM AND 0.381 INCHES MAXIMUM | | HEAD HEIGHT | 0.044 INCHES MINIMUM AND 0.046 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR RING | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE TREATMENT | PHOSPHATE FASTENER | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.363 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|