|
|
|
National Stock Number:
5305-01-337-5989
Federal Supply Class:
5305
National Item Identification Number:
013375989
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| HT4075VS6-16-80 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4075VS6-16-80 | 17419 | DEUTSCH CO THE | | HT4075VS6-16-80 | 17446 | HUCK INTERNATIONAL, INC | | HT4075VS6-16-80 | 73197 | HI-SHEAR CORPORATION | | HT4075VS6-16-80 | 80539 | SPS TECHNOLOGIES, LLC | | HT4075VS6-16-80 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HT4075VS6-16-80 | 97928 | HUCK INTL INC | | HT4075VS6-16-80 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.626 INCHES MINIMUM AND 1.656 INCHES MAXIMUM | | GRIP LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | HEAD DIAMETER | 0.692 INCHES MINIMUM AND 0.763 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | SPECIAL FEATURES | TAPPED HOLE IN HEAD 0.138-32 UNJC-3B THREADS. DISTANCE FROM TOP OF HEAD TO INJECTION PORT 0.800 NOM. INCH. INJECTION PORT 0.120 NOM. IN. LG; 0.060 NOM. IN. WIDE | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP32.0 MICROINCHES THREADS | | SURFACE TREATMENT | PHOSPHATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.641 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|