|
|
|
National Stock Number:
5305-01-338-9345
Federal Supply Class:
5305
National Item Identification Number:
013389345
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| SFHM26-9-31 | 56878 | SPS TECHNOLOGIES, LLC | | SFHM26-9-31 | 96509 | SSP CONSTRUCTION EQUIPMENT INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 2.692 INCHES MINIMUM AND 2.736 INCHES MAXIMUM | | GRIP DIAMETER | 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM | | GRIP LENGTH | 1.928 INCHES MINIMUM AND 1.948 INCHES MAXIMUM | | HEAD DIAMETER | 1.076 INCHES MINIMUM AND 1.145 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | HIGH-TORQUE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5842 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COBALT COMP MP-35-N OVERALL | | NOMINAL THREAD DIAMETER | 0.562 INCHES | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.770 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 18 |
|
|