5305-01-339-0197, SCREW,EXTERNALLY RELIEVED BODY

National Stock Number:
5305-01-339-0197

Federal Supply Class:
5305

National Item Identification Number:
013390197

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.

Manufacturer Information:

MS51495-1

96906

MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	1
FASTENER LENGTH	0.448 INCHES MINIMUM AND 0.488 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD	0.067 INCHES MINIMUM AND 0.072 INCHES MAXIMUM
HEAD DIAMETER	0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD HEIGHT	0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE	FLAT CHAMFER
INTERNAL DRIVE STYLE	SLOT
MATERIAL	STEEL CORROSION RESISTING OVERALL
MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.112 INCHES
NONDEFINITIVE SPEC/STD DATA	1 TYPE AND 4S STYLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	ASTMA380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
THREAD CLASS	2A
THREAD SERIES DESIGNATOR	UNC
THREAD QUANTITY PER INCH	40

Click here to Register for Free 30-day Trial