5305-01-339-1413, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-339-1413

Federal Supply Class:
5305

National Item Identification Number:
013391413

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

CHT4067-4-5A	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
CHT4067-4-5A	92215	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH	0.750 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
FEATURES PROVIDED	O RING AND CETYL ALCOHOL LUBRICANT
GRIP LENGTH	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
HEAD DIAMETER	0.477 INCHES MINIMUM AND 0.508 INCHES MAXIMUM
HEAD HEIGHT	0.713 INCHES MINIMUM AND 0.733 INCHES MAXIMUM
HEAD STYLE	FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE	HIGH-TORQUE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH	125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-S-83488,TY2,CL3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ALUMINUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.469 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial