5305-01-354-2495, SCREW,CLOSE TOLERANCE

National Stock Number:
5305-01-354-2495

Federal Supply Class:
5305

National Item Identification Number:
013542495

Description:
SCREW,CLOSE TOLERANCE

Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Manufacturer Information:

NAS7701-3

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

FASTENER LENGTH	0.449 INCHES MINIMUM AND 0.479 INCHES MAXIMUM
GRIP LENGTH	0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
GRIP DIAMETER	0.1365 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM
HEAD DIAMETER	0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT	0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
HEAD STYLE	PAN
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.138 INCHES
SPECIFICATION/STANDARD DATA	80205-NAS7701 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.276 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNJC
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial