|
|
|
National Stock Number:
5305-01-365-4843
Federal Supply Class:
5305
National Item Identification Number:
013654843
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 70-1326213-1 | 04655 | GENERAL DYNAMICS MISSION SYSTEMS, INC. | | 70-1326213-1 | 11293 | GTE GOVERNMENT SYSTEMS CORP STRATEGIC SYSTEMS DIV | | YC3-8542 | 46384 | PENN ENGINEERING & MANUFACTURING CORP |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.368 INCHES MINIMUM AND | | 0.450 INCHES MAXIMUM | | FASTENER LENGTH | 0.430 INCHES MINIMUM AND | | 0.450 INCHES MAXIMUM | | MATERIAL | STEEL COMP 303 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.250 INCHES NOMINAL | | HEAD HEIGHT | 0.107 INCHES MINIMUM AND | | 0.112 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.250 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 | | FIRST DIAMETER FROM HEAD | 0.125 INCHES MINIMUM AND | | 0.131 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.149 INCHES MINIMUM AND | | 0.179 INCHES MAXIMUM |
|
|