|
|
|
National Stock Number:
5305-01-456-6318
Federal Supply Class:
5305
National Item Identification Number:
014566318
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 2907549-3 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 2907549-3 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 2907549-3 | 70318 | ALLMETAL SCREW PRODUCTS CORP | | P20 | 97852 | STAR STAINLESS SCREW CO |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.192 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.330 INCHES NOMINAL | | FASTENER LENGTH | 0.880 INCHES NOMINAL | | MATERIAL | STEEL COMP 302 OR | | STEEL COMP 303 OR | | STEEL COMP 304 OR | | STEEL COMP 305 OR | | STEEL COMP 316 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OR | | QQ-S-764 FED SPEC 1ST MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | PAN NO. 2 | | HEAD DIAMETER | 0.357 INCHES MINIMUM AND | | 0.373 INCHES MAXIMUM | | HEAD HEIGHT | 0.099 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.150 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.550 INCHES NOMINAL |
|