|
|
|
National Stock Number:
5305-01-458-2952
Federal Supply Class:
5305
National Item Identification Number:
014582952
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 290-035-0033 | 02HV2 | A P C COMPONENTS INC. | | 290-035-0033 | 12360 | ALBANY FASTENERS PAWTUCKET FASTENERS DIV | | 290-035-0033 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.302 INCHES MINIMUM AND | | 0.322 INCHES MAXIMUM | | FASTENER LENGTH | 0.845 INCHES MINIMUM AND | | 0.875 INCHES MAXIMUM | | MATERIAL | STEEL COMP 303 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | PAN NO. 2 | | HEAD DIAMETER | 0.226 INCHES MAXIMUM | | HEAD HEIGHT | 0.138 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.109 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.090 INCHES MINIMUM AND | | 0.100 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.304 INCHES MINIMUM AND | | 0.354 INCHES MAXIMUM |
|
|