|
|
|
National Stock Number:
5305-01-477-5659
Federal Supply Class:
5305
National Item Identification Number:
014775659
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 11827V5-14A | 59563 | REID PRODUCTS INC. | | 3M1169V5-14A | 76301 | THE BOEING COMPANY | | TX1026V5-14A | 06725 | SPS TECHNOLOGIES, LLC | | TX1026V5-14A | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | GS1006V5-14A | 1EM77 | B & B SPECIALTIES INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 1.329 INCHES MINIMUM AND 1.359 INCHES MAXIMUM | | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM | | GRIP DIAMETER | 0.311 INCHES NOMINAL | | HEAD DIAMETER | 0.623 INCHES MINIMUM AND 0.633 INCHES MAXIMUM | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | TORX | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS | | MATERIAL | TITANIUM OVERALL | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SPECIAL FEATURES | 125 KSI SHEAR STRENGTH | | POINT STYLE | FLAT | | POINT DIAMETER | 0.469 INCHES NOMINAL | | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.464 INCHES MINIMUM AND 0.474 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|