|
|
|
National Stock Number:
5305-01-482-3277
Federal Supply Class:
5305
National Item Identification Number:
014823277
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 7232096 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.370 INCHES NOMINAL | | COLOR | BLACK OVERALL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FASTENER LENGTH | 0.830 INCHES NOMINAL | | FIRST DIAMETER FROM HEAD | 0.185 INCHES NOMINAL | | HEAD HEIGHT | 0.250 INCHES NOMINAL | | HEAD STYLE | DISHED HEXAGON | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE DIAMETER | 0.052 INCHES NOMINAL | | HOLE QUANTITY | 2 | | HOLE TYPE | DRILLED | | INTERNAL DRIVE STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTMF593 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | POINT DIAMETER | 0.185 INCHES NOMINAL | | POINT STYLE | FLAT | | SPECIAL FEATURES | ITEM IS ALTERED FROM PART NUMBER MS16995-49. LOCKING HOLE IS DRILLED INTO SIDE OF HEAD, THROUGH INTERNAL DRIVE AND OUT THE OTHER SIDE OF HEAD | | WIDTH ACROSS FLATS | 0.185 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.1875 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | THREAD CLASS | 3A | | THREAD LENGTH | 0.210 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNC |
|
|