|
|
|
National Stock Number:
5305-01-482-9873
Federal Supply Class:
5305
National Item Identification Number:
014829873
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| CA21017-4-17 | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.2500 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.536 INCHES NOMINAL | | FASTENER LENGTH | 1.598 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | PAN NO. 2 | | HEAD DIAMETER | 0.477 INCHES MINIMUM AND | | 0.492 INCHES MAXIMUM | | HEAD HEIGHT | 0.140 INCHES MINIMUM AND | | 0.150 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | HEXAGON | | WIDTH ACROSS FLATS | 0.1565 INCHES MINIMUM AND | | 0.1587 INCHES MAXIMUM | | GRIP LENGTH | 1.062 INCHES NOMINAL | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND | | 0.2495 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | SPECIAL FEATURES | HOLE AT THREADED END WITH DIAMETER REAMED TO ACCEPT PLUG; MINIMUM TENSILE STRENGTH IS 5820 POUNDS |
|
|