5910-01-491-0533 CAPACITOR,FIXED,ELECTROLYTIC Index 5331-01-491-0535 O-RING

National Stock Number:
5305-01-491-0534

Federal Supply Class:
5305

National Item Identification Number:
014910534

Description:
SCREW,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.


Manufacturer Information:
5073-M07-F1504729UNICORP.
5924811-10153711NAVAL SEA SYSTEMS COMMAND
MX102604729UNICORP.
SEC5924811-1010MKW8FASTENER COMPONENTS INC


Techincal Specification:
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY2
FASTENER LENGTH1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD0.225 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD HEIGHT0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD STYLEFLAT CHAMFER
INTERNAL DRIVE STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764;CLASS 7;TYPE A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES
SECOND DIAMETER FROM HEAD0.214 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
WIDTH ACROSS FLATS0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONXXB000 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH18
THREAD SERIES DESIGNATORUNC


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us