5305-01-501-9750, SCREW ASSEMBLY,PANEL

National Stock Number:
5305-01-501-9750

Federal Supply Class:
5305

National Item Identification Number:
015019750

Description:
SCREW ASSEMBLY,PANEL

Detail:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.

Manufacturer Information:

11438307-117	18876	U S ARMY AVIATION AND MISSILE COMMAND
11438307-117	3B150	RAYTHEON COMPANY
11438307-117	49956	RAYTHEON COMPANY
11438307-117	54X10	RAYTHEON COMPANY
FT1500-8-2-3DL	58794	FASTENER TECHNOLOGY CORP

Techincal Specification:

FASTENER LENGTH	0.920 INCHES MINIMUM AND 0.960 INCHES MAXIMUM
HARDNESS RATING	43.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM PRIMARY WASHER
HEAD DIAMETER	0.420 INCHES NOMINAL
HEAD HEIGHT	0.495 INCHES NOMINAL
HEAD STYLE	KNURLED NO. 5
INTERNAL DRIVE STYLE	SLOT
MATERIAL ACCOMMODATED THICKNESS	0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM
MATERIAL	ALUMINUM ALLOY 6061 HEAD
MATERIAL	STEEL COMP 1075 PRIMARY WASHER
MATERIAL	STEEL COMP 301 SECONDARY WASHER
MATERIAL	STEEL COMP 304 STAND-OFF
MATERIAL	STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 384 BEARING SURFACE OF HEAD
MATERIAL	STEEL COMP 302 SPRING
NOMINAL THREAD DIAMETER	0.164 INCHES
SPECIAL FEATURES	STUD MATERIAL CLASS 300 SERIES STEEL; PRIMARY WASHER WAVE SHAPED 2 REQUIRED
SURFACE TREATMENT	ANODIZE HEAD
SURFACE TREATMENT	PASSIVATE BEARING SURFACE OF HEAD
SURFACE TREATMENT	PASSIVATE PRIMARY WASHER
SURFACE TREATMENT	PASSIVATE SECONDARY WASHER
SURFACE TREATMENT	PASSIVATE SPRING
SURFACE TREATMENT	PASSIVATE STAND-OFF
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.425 INCHES MINIMUM AND 0.465 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNC

Click here to Register for Free 30-day Trial