|
|
|
National Stock Number:
5305-01-504-0172
Federal Supply Class:
5305
National Item Identification Number:
015040172
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| NAS1131-1 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| FASTENER LENGTH | 0.323 INCHES MINIMUM AND 0.353 INCHES MAXIMUM | | GRIP DIAMETER | 0.1365 INCHES MINIMUM AND 0.1375 INCHES MAXIMUM | | GRIP LENGTH | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM | | HEAD DIAMETER | 0.256 INCHES MINIMUM AND 0.270 INCHES MAXIMUM | | HEAD HEIGHT | 0.087 INCHES MINIMUM AND 0.097 INCHES MAXIMUM | | HEAD STYLE | PAN | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL | | NOMINAL THREAD DIAMETER | 0.138 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TY II, CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.260 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJC | | THREAD QUANTITY PER INCH | 32 |
|
|