|
|
|
National Stock Number:
5305-01-563-8107
Federal Supply Class:
5305
National Item Identification Number:
015638107
Description:
SCREW,MACHINE
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.
|
Manufacturer Information:
| 91771A246 | 3A054 | MCMASTER-CARR SUPPLY CO |
|
Techincal Specification:
| COUNTERSINK ANGLE | 82.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.991 INCHES NOMINAL | | HEAD DIAMETER | 0.362 INCHES NOMINAL | | HEAD STYLE | FLAT COUNTERSUNK | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE II | | PART NAME ASSIGNED BY CONTROLLING AGENCY | 18-8 STAINLESS STEEL PHILLIPS FLAT HEAD MACHINE SCREW | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SCREW MATERIAL | STEEL COMP 302 | | SPECIAL FEATURES | USE A COUNTERSINK TO CREATE A RECESS THE BODY DIAMETER OF YOUR COUNTERSINK SHOULD BE EQUAL TO OR LARGER THAN YOUR SCREWS HEAD DIAMETER AND ITS INCLUDED ANGLE SHOULD MATCH YOUR SCREWS HEAD ANGLE | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD LENGTH | 0.759 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNC |
|
|