| CHAMFER ANGLE | 30.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 2.750 INCHES NOMINAL |
| HEAD DIAMETER | 1.107 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| HEAD HEIGHT | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| HOLE CONFIGURATION STYLE | ROUND INTERNAL HEXAGON |
| HOLE DIAMETER | 0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| HOLE QUANTITY | 6 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | FF-S-86 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| NOMINAL THREAD DIAMETER | 0.750 INCHES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-13924, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | OXIDE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 2.000 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNRC |
| THREAD QUANTITY PER INCH | 10 |
| WIDTH ACROSS FLATS | 0.625 INCHES NOMINAL |