| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 1.410 INCHES MINIMUM AND 1.440 INCHES MAXIMUM |
| GRIP DIAMETER | 0.2041 INCHES MINIMUM AND 0.2051 INCHES MAXIMUM |
| GRIP LENGTH | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM |
| HEAD HEIGHT | 0.083 INCHES NOMINAL |
| HEAD DIAMETER | 0.3390 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6349 OR 6382 ASSN STD 1ST MATERIAL RESPONSE OR AMS6484 OR 6415 ASSN STD 2ND MATERIAL RESPONSE OR AMS6322,6325 OR 6327 ASSN STD 3RD MATERIAL RESPONSE OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,SHEAR,100 DEG F FLUSH HEAD,OFFSET CRUCIFORM,OFFSET CRUCIFORM-RIBBED AND DOVETAIL SLOT,95 KSI FTU |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| MINIMUM TENSILE STRENGTH | 95000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.1900 INCHES |
| SPECIFICATION/STANDARD DATA | 80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE FINISH | 32.0 MICROINCHES OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416,TYPE II,CLASS 2 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.363 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| THREAD QUANTITY PER INCH | 32 |