| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 0.996 INCHES MINIMUM AND 1.026 INCHES MAXIMUM |
| GRIP DIAMETER | 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM |
| GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| HEAD HEIGHT | 0.039 INCHES MAXIMUM |
| HEAD DIAMETER | 0.257 INCHES MAXIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE III |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6382 NATIONAL STD/SPEC 1ST MATERIAL RESPONSE OR AMS6415 OR 6484 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OR AMS6322,6325 OR 6327 NATIONAL STD/SPEC 3RD MATERIAL RESPONSE OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,SHEAR,100 DEG REDUCED HEAD,RIBBED CRUCIFORM RECESS,CLOSE TOLERANCE,ALLOY STEEL,SHORT THREAD |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 OVERALL |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.1640 INCHES |
| SINGLE SHEAR STRENGTH | 95000 POUNDS PER SQUARE INCH |
| SPECIFICATION/STANDARD DATA | 80205-NAS8602 THRU NAS8616 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416,TYPE II,CLASS 2. EMBRITTLEMENT REQUIREMENTS PER NAS 4002 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.323 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNJC |
| THREAD QUANTITY PER INCH | 32 |