|
|
|
National Stock Number:
5305-14-288-3376
Federal Supply Class:
5305
National Item Identification Number:
142883376
Description:
SCREW,MACHINE
Detail:
(ALL EXCEPT USA) A HEADED EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION MAY EXTEND ON PART OR WHOLE OF ITS SHANK. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH A TOOL. THE THREADED PORTION IS CYLINDRICAL AND ITS DIAMETER 1.6 MM OR MORE. FOR ITEMS WITH DIAMETERS BELOW 1.6 MM SEE SCREW, INSTRUMENT. THE ITEM IS DESIGNED TO BE DRIVEN IN A PREEXISTING MATING SCREWTHREAD OR TO ACCOMMODATE A NUT, INSURING ASSEMBLING OF PARTS, WITH THE PART OPPOSITE THE HEAD ACTING AS A NUT, OR INSURING A GRIP BETWEEN THE BEARING SURFACE OF ITS HEAD AND THAT OF A NUT SCREWED ON ITS END. THE THREADED END MAY HAVE A PILOT FOR EASIER DRIVING INTO A DRILLED HOLE. IF THE POINT IS DESIGNED TO PREVENT OR RESTRICT RELATIVE MOVEMENTS OF PARTS SEE SETSCREW. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. IF THE ITEM IS FURNISHED WITH ATTACHMENTS SUCH AS NUT(S), WASHER(S), PIN(S), AND THE LIKE, SEE SCREW ASSEMBLY OR BOLT (AS MODIFIED).
|
Manufacturer Information:
| HZ40CFE150085 | F1958 | LIEBHERR-AEROSPACE TOULOUSE SAS | | HZ4X15X8-5CFE | F1958 | LIEBHERR-AEROSPACE TOULOUSE SAS | | S320HZ4X15X8-5CFE | F1958 | LIEBHERR-AEROSPACE TOULOUSE SAS |
|
Techincal Specification:
| EXTERNAL THREAD TOLERANCE CLASS | 2 | | FASTENER LENGTH | 15.0 MILLIMETERS NOMINAL | | HEAD HEIGHT | 2.25 MILLIMETERS MINIMUM AND 2.5 MILLIMETERS MAXIMUM | | HEAD STYLE | HEXAGON | | INTERNAL DRIVE STYLE | W/O INTERNAL DRIVE | | MINIMUM TENSILE STRENGTH | 880 MEGAPASCALS | | NOMINAL THREAD DIAMETER | 4.0 MILLIMETERS | | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | F3025 AIR 9160C MIL STD SINGLE MATERIAL RESPONSE | | SCREW MATERIAL | STEEL | | SCREW SURFACE TREATMENT | SILVER | | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NF L 09-753 CODE E NATIONAL SPEC SINGLE TREATMENT RESPONSE | | WIDTH BETWEEN FLATS | 6.78 MILLIMETERS MINIMUM AND 7.0 MILLIMETERS MAXIMUM | | TEST DATA DOCUMENT | F3025-AIR 9173 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 8.5 MILLIMETERS NOMINAL | | THREAD SERIES DESIGNATOR | SI-M | | THREAD PITCH IN MILLIMETERS | 0.75 |
|
|