6625-00-063-5005 TEST STATION,ELECTRICAL-ELECTRONIC EQUIP Index 6625-00-063-5007 TEST SET SUBASSEMBLY,ELECTRICAL

National Stock Number:
5306-00-063-5006

Federal Supply Class:
5306

National Item Identification Number:
000635006

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
NAS632-4580205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
THREAD SERIES DESIGNATORUNJF
NOMINAL THREAD DIAMETER0.750 INCHES
THREAD QUANTITY PER INCH16
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.968 INCHES MINIMUM AND
1.018 INCHES MAXIMUM
FASTENER LENGTH3.790 INCHES MINIMUM AND
3.820 INCHES MAXIMUM
MATERIALSTEEL COMP 4140 OR
STEEL COMP E4340 OR
STEEL COMP 6150 OR
STEEL COMP 8735 OR
STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR
MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR
MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR
MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR
MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND
43.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH
HEAD STYLEDOUBLE HEXAGON W/HOLE
HEAD HEIGHT0.701 INCHES MINIMUM AND
0.721 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.808 INCHES MINIMUM AND
0.817 INCHES MAXIMUM
EXTENDED WASHER DIAMETER1.220 INCHES MINIMUM AND
1.230 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.168 INCHES MINIMUM AND
0.188 INCHES MAXIMUM
GRIP LENGTH2.802 INCHES MINIMUM AND
2.822 INCHES MAXIMUM
GRIP DIAMETER0.7480 INCHES MINIMUM AND
0.7490 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA80205-NAS632 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us