5306-00-083-4315, BOLT,SHOULDER

National Stock Number:
5306-00-083-4315

Federal Supply Class:
5306

National Item Identification Number:
000834315

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.

Manufacturer Information:

9936B221	13002	GOODRICH CORPORATION
9936B221A	13002	GOODRICH CORPORATION
9936B221A	6K4C8	GOODRICH CORPORATION
9936B221A	6Z056	CM MANUFACTURING INC

Techincal Specification:

THREAD SERIES DESIGNATOR	UNF
NOMINAL THREAD DIAMETER	0.438 INCHES
THREAD QUANTITY PER INCH	20
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.320 INCHES MINIMUM AND
	0.330 INCHES MAXIMUM
FASTENER LENGTH	1.850 INCHES NOMINAL
MATERIAL	STEEL COMP E4340 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM HEAD
	CHROMIUM GRIP
	CADMIUM THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	CPT8204,FSCM13002 MFR REF SINGLE TREATMENT RESPONSE HEAD
	CPT8205,FSCM13002 MFR REF SINGLE TREATMENT RESPONSE GRIP
	CPT8204,FSCM13002 MFR REF SINGLE TREATMENT RESPONSE THREADS
HEAD STYLE	DEE
HEAD DIAMETER	0.880 INCHES NOMINAL
HEAD HEIGHT	0.190 INCHES NOMINAL
DISTANCE FROM CENTERLINE TO FLAT	0.370 INCHES MINIMUM AND
	0.375 INCHES MAXIMUM
SHOULDER SHAPE	ROUND FIRST SHOULDER
SHOULDER DIAMETER	0.5595 INCHES MINIMUM AND
	0.5615 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH	1.520 INCHES MINIMUM AND
	1.530 INCHES MAXIMUM FIRST SHOULDER
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.730 INCHES MINIMUM AND
	1.740 INCHES MAXIMUM FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.105 INCHES MINIMUM AND
	0.108 INCHES MAXIMUM FIRST HOLE
TEST DATA DOCUMENT	81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THE MANUFACTURERS DATA
MANUFACTURERS CODE	13002
DESIGN CONTROL REFERENCE	9936B221A

Click here to Register for Free 30-day Trial