|
|
|
National Stock Number:
5306-00-094-4400
Federal Supply Class:
5306
National Item Identification Number:
000944400
Description:
BOLT,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.
|
Manufacturer Information:
| 175192 | 36659 | LOCKHEED MARTIN CORP LOCKHEED MARTIN AERONAUTICAL SYSTEMS BURBANK OPNS | | 175192 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.875 INCHES | | THREAD QUANTITY PER INCH | 14 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.500 INCHES MINIMUM | | FASTENER LENGTH | 3.625 INCHES NOMINAL | | MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.250 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 1.250 INCHES NOMINAL | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.062 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 3 | | FIRST DIAMETER FROM HEAD | 0.781 INCHES NOMINAL | | SECOND DIAMETER FROM HEAD | 0.873 INCHES MINIMUM AND | | 0.874 INCHES MAXIMUM | | THIRD DIAMETER FROM HEAD | 0.781 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.100 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 3.025 INCHES NOMINAL | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | 3.125 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | 175192 |
|
|