|
|
|
National Stock Number:
5306-00-243-7130
Federal Supply Class:
5306
National Item Identification Number:
002437130
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 72346-4-20 | 56878 | SPS TECHNOLOGIES, LLC | | 72346-4-20 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| EXTENDED WASHER THICKNESS | 0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM | | FASTENER LENGTH | 1.720 INCHES MINIMUM AND 1.750 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 1.250 INCHES NOMINAL | | HEAD HEIGHT | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | WASPALOY FSCM 71321 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | WIDTH BETWEEN FLATS | 0.306 INCHES MINIMUM AND 0.315 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND |
|
|