|
|
|
National Stock Number:
5306-00-260-7573
Federal Supply Class:
5306
National Item Identification Number:
002607573
Description:
BOLT,EYE
Detail:
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also BOLT, HOOK. Excludes CONNECTOR, ROD END.
|
Manufacturer Information:
| AN42B7 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | AN42B7 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.391 INCHES MINIMUM AND | | 0.437 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4140 OR | | STEEL COMP 8740 OR | | STEEL COMP 8630 OR | | STEEL COMP 8735 OR | | STEEL COMP 4130 OR | | STEEL COMP 4037 OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER | | EYE INSIDE DIAMETER | 0.190 INCHES MINIMUM AND | | 0.192 INCHES MAXIMUM | | SHOULDER THICKNESS | 0.062 INCHES NOMINAL | | SHANK LENGTH | 0.891 INCHES MINIMUM AND | | 0.938 INCHES MAXIMUM | | EYE STOCK THICKNESS | 0.089 INCHES MINIMUM AND | | 0.099 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.437 INCHES NOMINAL | | OVERALL LENGTH | 1.561 INCHES NOMINAL | | DISTANCE FROM CENTER OF EYE TO SHANK END | 1.311 INCHES NOMINAL | | EYE OUTSIDE WIDTH | 0.437 INCHES NOMINAL | | DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 0.750 INCHES MINIMUM AND | | 0.781 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM FIRST HOLE |
|
|