| DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 0.656 INCHES MINIMUM AND 0.688 INCHES MAXIMUM FIRST HOLE |
| EYE OUTSIDE WIDTH | 1.000 INCHES NOMINAL |
| EYE STOCK THICKNESS | 0.308 INCHES MINIMUM AND 0.318 INCHES MAXIMUM |
| EYE INSIDE DIAMETER | 0.438 INCHES MINIMUM AND 0.441 INCHES MAXIMUM |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| OVERALL LENGTH | 2.218 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.500 INCHES |
| SHANK LENGTH | 0.828 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| SHANK UNTHREADED HOLE DIAMETER | 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM FIRST HOLE |
| SHOULDER DIAMETER | 1.000 INCHES NOMINAL |
| SHOULDER THICKNESS | 0.125 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNF |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.766 INCHES MINIMUM AND 0.813 INCHES MAXIMUM |