5306-00-282-2765, BOLT,MACHINE

National Stock Number:
5306-00-282-2765

Federal Supply Class:
5306

National Item Identification Number:
002822765

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

AN6DDH7	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
B6812	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.750 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH	0.953 INCHES NOMINAL
FEATURES PROVIDED	FINISHED HEAD
GRIP LENGTH	0.312 INCHES NOMINAL
HEAD HEIGHT	0.203 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD STYLE	HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE DIAMETER	0.070 INCHES NOMINAL
HOLE QUANTITY	1
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-267 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-268 FED SPEC 1ST MATERIAL RESPONSE OR MIL-W-7986 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-W-7986 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-W-7986 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-W-7986 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-W-7986 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MATERIAL	ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2117 OR ALUMINUM ALLOY 5056 OVERALL
MINIMUM TENSILE STRENGTH	62000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.375 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES NOMINAL FIRST HOLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	OXIDE FILM AND ANODIZE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.641 INCHES MINIMUM
THREAD SERIES DESIGNATOR	UNF
THREAD QUANTITY PER INCH	24
WIDTH BETWEEN FLATS	0.553 INCHES MINIMUM AND 0.565 INCHES MAXIMUM

Click here to Register for Free 30-day Trial