1680-00-292-4606 YOKE,AILERON CONTROL-ROLL TRIM Index 5306-00-292-4610 BOLT,MACHINE

National Stock Number:
5306-00-292-4609

Federal Supply Class:
5306

National Item Identification Number:
002924609

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
NAS428-5-1680205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH1.750 INCHES NOMINAL
MATERIALSTEEL COMP 4037 OR
STEEL COMP 4130 OR
STEEL COMP 8630 OR
STEEL COMP 8735 OR
STEEL COMP 8740 OR
STEEL COMP 4140 OVERALL
THREAD LENGTH1.688 INCHES MINIMUM AND
1.719 INCHES MAXIMUM
HEAD STYLECROWNED HEXAGON
THREAD SERIES DESIGNATORUNF
NOMINAL THREAD DIAMETER0.312 INCHES
THREAD QUANTITY PER INCH24
THREAD CLASS3A
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR
MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR
MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR
MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR
MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OR
MIL-S-5626 MIL SPEC 6TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND
CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND
32.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
HEAD HEIGHT0.172 INCHES NOMINAL
WIDTH BETWEEN FLATS0.500 INCHES NOMINAL
GRIP LENGTH0.031 INCHES MINIMUM AND
0.062 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us