5306-00-298-2645 BOLT,SHOULDER Index 5305-00-298-2660 SETSCREW

National Stock Number:
5306-00-298-2647

Federal Supply Class:
5306

National Item Identification Number:
002982647

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
110-10000489446HILLER AIRCRAFT CORPORATION


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER5.463 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH5.672 INCHES MINIMUM AND 5.733 INCHES MAXIMUM
HEAD HEIGHT0.750 INCHES NOMINAL
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
NOMINAL THREAD DIAMETER1.000 INCHES
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES NOMINAL FIRST HOLE
SHOULDER DIAMETER1.623 INCHES MINIMUM AND 1.624 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH4.400 INCHES NOMINAL FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
SURFACE TREATMENTCADMIUM HEAD
SURFACE TREATMENTCADMIUM THREADS
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.272 INCHES MINIMUM AND 1.333 INCHES MAXIMUM
THREAD QUANTITY PER INCH14
THREAD SERIES DESIGNATORUNF
WIDTH BETWEEN FLATS2.240 INCHES MINIMUM AND 2.253 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us