| CONCENTRIC HOLE DIAMETER | 0.2515 INCHES MINIMUM AND 0.2525 INCHES MAXIMUM |
| CRITICALITY CODE JUSTIFICATION | AAXC |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.746 INCHES MINIMUM AND 1.796 INCHES MAXIMUM FIRST HOLE |
| FASTENER LENGTH | 1.876 INCHES MINIMUM AND 1.906 INCHES MAXIMUM |
| HEAD HEIGHT | 0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| HEAD STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.375 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE |
| STYLE DESIGNATOR | CONCENTRIC HOLE UNTHREADED |
| WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.366 INCHES MINIMUM AND 0.416 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 24 |