| CHAMFER ANGLE | 45.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| HARDNESS RATING | 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD LENGTH | 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| HEAD HEIGHT | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| HEAD STYLE | TEE NO. 6 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | IRON ALLOY 660 OVERALL |
| MINIMUM TENSILE STRENGTH | 130000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 85000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SPECIAL FEATURES | HOLE DRILLED ALONG LATERAL AXIS OF HEAD LENGTH 0.037 IN. MIN 0.047 IN. MAX DIA BY 0.059 IN. FROM TOP OF HEAD |
| WIDTH BETWEEN FLATS | 0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| SURFACE FINISH | 63.0 MICROINCHES THREADS |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.481 INCHES MINIMUM AND 0.521 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 32 |