|
|
|
National Stock Number:
5306-00-516-5998
Federal Supply Class:
5306
National Item Identification Number:
005165998
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| VEP220555-8-23 | 06710 | VALLEY-TODECO, INC. |
|
Techincal Specification:
| THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 2.329 INCHES MINIMUM AND | | 2.359 INCHES MAXIMUM | | THREAD LENGTH | 0.881 INCHES MINIMUM AND | | 0.931 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.500 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3A | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | HEAD HEIGHT | 0.494 INCHES MINIMUM AND | | 0.514 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND | | 0.564 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 0.818 INCHES MINIMUM AND | | 0.828 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.113 INCHES MINIMUM AND | | 0.133 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.350 INCHES MINIMUM AND | | 0.390 INCHES MAXIMUM | | GRIP LENGTH | 1.428 INCHES MINIMUM AND | | 1.448 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|