5306-00-527-4956, BOLT,MACHINE

National Stock Number:
5306-00-527-4956

Federal Supply Class:
5306

National Item Identification Number:
005274956

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

24-026	88008	TENNESSEE VALLEY AUTHORITY
5-8 11X2IN	47562	GAGE CO THE
AMSE-B18.2.1	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
B18.2.1	80204	AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
FF-B-575 TY1	80244	GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE
FF-B-575	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
MS35355-160	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FASTENER LENGTH	1.920 INCHES MINIMUM AND 2.060 INCHES MAXIMUM
FEATURES PROVIDED	UNFINISHED HEAD
HARDNESS RATING	25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.400 INCHES MINIMUM AND 0.444 INCHES MAXIMUM
HEAD STYLE	SQUARE
MATERIAL DOCUMENT AND CLASSIFICATION	SAE GR 1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL OVERALL
MINIMUM TENSILE STRENGTH	55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.625 INCHES
NONDEFINITIVE SPEC/STD DATA	1 TYPE
SPECIAL FEATURES	TO BE PROCURED IAW ASME-B18.2.1
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	SAE/AMS QQ-P-416 TY2CL3 FED SPEC 1ST TREATMENT RESPONSE OR ASTM 633 FED SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OR ZINC OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	1.500 INCHES MINIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH	11
WIDTH BETWEEN FLATS	0.906 INCHES MINIMUM AND 0.938 INCHES MAXIMUM

Click here to Register for Free 30-day Trial