|
|
|
National Stock Number:
5306-00-604-3169
Federal Supply Class:
5306
National Item Identification Number:
006043169
Description:
BOLT,EYE
Detail:
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also BOLT, HOOK. Excludes CONNECTOR, ROD END.
|
Manufacturer Information:
| 204-001-768-001 | 97499 | BELL TEXTRON INC | | 204-001-768-1 | 04614 | TEXTRON SYSTEMS CORPORATION | | 204-001-768-1 | 80070 | LOCKHEED MARTIN CORPORATION | | 204-001-768-1 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| DISTANCE FROM CENTER OF EYE TO SHANK END | 1.250 INCHES NOMINAL | | EYE STOCK THICKNESS | 0.372 INCHES MINIMUM AND 0.376 INCHES MAXIMUM | | EYE INSIDE DIAMETER | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | EYE OUTSIDE WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM | | OVERALL LENGTH | 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,PHYSICAL COND C,SURFACE COND 4 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758,PHYSICAL COND C,SURFACE COND 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | SHANK LENGTH | 1.390 INCHES MINIMUM AND 1.420 INCHES MAXIMUM | | SPECIAL FEATURES | SHANK IS UNDERCUT AT EYE 0.145 IN. MIN,0.165 IN. MAX W,0.285 IN. MIN,0.288 IN. MAX DIA,EYE IS DRILLED THROUGH LONG CROSS SECT.,0.094 IN. MIN,0.097 IN. MAX | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.835 INCHES MINIMUM AND 0.855 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 16 | | THREAD SERIES DESIGNATOR | UNC |
|
|