| THREAD SERIES DESIGNATOR | UNF |
| NOMINAL THREAD DIAMETER | 0.750 INCHES |
| THREAD QUANTITY PER INCH | 16 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 1.037 INCHES MINIMUM AND |
| 1.087 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 4140 OR |
| STEEL COMP E4340 OR |
| STEEL COMP 6150 OR |
| STEEL COMP 8735 OR |
| STEEL COMP 8740 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR |
| MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR |
| MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR |
| MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR |
| MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
| HARDNESS RATING | 34.0 ROCKWELL C MINIMUM AND |
| 40.0 ROCKWELL C MAXIMUM OVERALL |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| HEAD STYLE | BEVEL-CONICAL |
| HEAD DIAMETER | 1.040 INCHES NOMINAL |
| HEAD HEIGHT | 0.750 INCHES NOMINAL |
| INTERNAL DRIVE STYLE | HEXAGON |
| WIDTH ACROSS FLATS | 0.563 INCHES MINIMUM AND |
| 0.566 INCHES MAXIMUM |
| SPECIAL FEATURES | THE TAPER OF THE HEAD STARTS 0.094 IN. FROM THE BEARING SURFACE,THE SMALL END OF THE TAPER IS 0.858 IN. TO THE END OF THE FIRST DIA. |
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY HEAD DIA. |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |