|
|
|
National Stock Number:
5306-00-626-1104
Federal Supply Class:
5306
National Item Identification Number:
006261104
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| 117WM10086-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 2.000 INCHES NOMINAL | | MATERIAL | STEEL COMP E4340 OVERALL | | THREAD LENGTH | 1.937 INCHES MINIMUM | | HEAD STYLE | HEXAGON | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND | | 37.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH | | HEAD HEIGHT | 0.250 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND | | 0.565 INCHES MAXIMUM | | LOCKING FEATURE | PATCH OR | | STRIP THREADS | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.563 INCHES NOMINAL FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.148 INCHES MINIMUM AND | | 0.150 INCHES MAXIMUM FIRST HOLE | | FEATURES PROVIDED | FINISHED HEAD | | SPECIAL FEATURES | 0.500 RAD AT THD END |
|
|