| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 2.540 INCHES NOMINAL |
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF THIRD DIAMETER | 4.130 INCHES NOMINAL |
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 1.500 INCHES NOMINAL |
| CRITICALITY CODE JUSTIFICATION | AGAV AND SFTT |
| EXTENDED WASHER THICKNESS | 0.018 INCHES NOMINAL |
| EXTENDED WASHER DIAMETER | 1.052 INCHES MINIMUM AND 1.062 INCHES MAXIMUM |
| EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 3 |
| FASTENER LENGTH | 4.850 INCHES NOMINAL |
| FIRST DIAMETER FROM HEAD | 0.655 INCHES NOMINAL |
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD HEIGHT | 0.054 INCHES NOMINAL |
| HEAD STYLE | HEXAGON EXTENDED WASHER |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-RELIEVED SPL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| NOMINAL THREAD DIAMETER | 0.750 INCHES |
| SPECIAL FEATURES | 2 HOLES OPPOSITE END FROM HEAD; COUNTERSUNK TO 0.22 DIAME |
| SECOND DIAMETER FROM HEAD | 0.7545 INCHES MINIMUM AND 0.7548 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE I CLASS B PER HS74 FED STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THIRD DIAMETER FROM HEAD | 0.660 INCHES MINIMUM AND 0.662 INCHES MAXIMUM |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.710 INCHES NOMINAL |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 16 |