|
|
|
National Stock Number:
5306-00-757-4213
Federal Supply Class:
5306
National Item Identification Number:
007574213
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 3012385 | 00198 | PRATT & WHITNEY CANADA CORP |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.825 INCHES MINIMUM AND 0.835 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 0.940 INCHES MINIMUM AND 0.960 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM | | GRIP LENGTH | 0.940 INCHES MINIMUM AND 0.960 INCHES MAXIMUM | | HEAD HEIGHT | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD DIAMETER | 0.192 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE | | WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.420 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|