|
|
|
National Stock Number:
5306-00-832-9778
Federal Supply Class:
5306
National Item Identification Number:
008329778
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 3822901-1 | 34087 | KITCO LLC | | 3822901-1 | 6Z473 | W D C MFG CO INC | | 3822901-1 | 88277 | THE BOEING COMPANY | | 3822901-1 | 8X044 | DERCO AEROSPACE, INC. | | 3822901-1 | 91145 | FLEET READINESS CENTER SOUTHWEST | | 3822901-1 | 96547 | FLEET READINESS CENTER SOUTHEAST DIV NAVY | | 3822901-1 | 96916 | FLEET READINESS CENTER EAST DIV DEPARTMENT OF NAVY |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.656 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM CENTERLINE TO FLAT | 0.308 INCHES NOMINAL | | FASTENER LENGTH | 1.808 INCHES MINIMUM AND 1.838 INCHES MAXIMUM | | GRIP DIAMETER | 0.6220 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM | | GRIP LENGTH | 1.376 INCHES MINIMUM AND 1.396 INCHES MAXIMUM | | HEAD DIAMETER | 1.125 INCHES NOMINAL | | HEAD HEIGHT | 0.375 INCHES NOMINAL | | HEAD STYLE | DEE CHAMFER | | MATERIAL | STEEL COMP 4340 OVERALL | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.104 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | DPS 9.74 TY 2 FSCM 88277 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.306 INCHES MINIMUM AND 0.346 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNF |
|
|