|
|
|
National Stock Number:
5306-00-846-9404
Federal Supply Class:
5306
National Item Identification Number:
008469404
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 4G53025-101A | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.861 INCHES MINIMUM AND 0.911 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 0.989 INCHES MINIMUM AND 1.019 INCHES MAXIMUM | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM | | HEAD HEIGHT | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | NAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY UNS R54520 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE | | WIDTH BETWEEN FLATS | 0.381 INCHES MINIMUM AND 0.389 INCHES MAXIMUM | | SURFACE FINISH | 16.0 MICROINCHES THREADS | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|