|
|
|
National Stock Number:
5306-00-847-3995
Federal Supply Class:
5306
National Item Identification Number:
008473995
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 3M33-6-8A | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| FASTENER LENGTH | 1.141 INCHES NOMINAL | | GRIP DIAMETER | 0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM | | GRIP LENGTH | 0.500 INCHES NOMINAL | | HARDNESS RATING | 24.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.219 INCHES NOMINAL | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | SPECIAL FEATURES | TENSILE STRENGTH SET AT ROOM TEMPERATURE NOT ABOVE 1200 DEG F | | WIDTH BETWEEN FLATS | 0.562 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.641 INCHES MINIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|