5306-00-873-7844, BOLT,EXTERNALLY RELIEVED BODY

1560-00-873-7855 BEARING ASSEMBLY,SUPPORT

National Stock Number:
5306-00-873-7844

Federal Supply Class:
5306

National Item Identification Number:
008737844

Description:
BOLT,EXTERNALLY RELIEVED BODY

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.

Manufacturer Information:

204-011-171-003	97499	BELL TEXTRON INC
204-011-171-3	97499	BELL TEXTRON INC

Techincal Specification:

THREAD SERIES DESIGNATOR	UNF
NOMINAL THREAD DIAMETER	0.500 INCHES
THREAD QUANTITY PER INCH	20
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.571 INCHES MINIMUM AND
	0.641 INCHES MAXIMUM
FASTENER LENGTH	3.476 INCHES MINIMUM AND
	3.506 INCHES MAXIMUM
MATERIAL	STEEL COMP E4340 OR
	STEEL COMP 4140 OR
	STEEL COMP 8740 OR
	STEEL COMP 8735 OR
	STEEL COMP 6150 OR
	STEEL COMP 4340 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR
	MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR
	MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR
	MIL-S-8503 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND
	43.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
HEAD STYLE	DOUBLE HEXAGON EXTENDED WASHER
HEAD HEIGHT	0.494 INCHES MINIMUM AND
	0.514 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.556 INCHES MINIMUM AND
	0.565 INCHES MAXIMUM
EXTENDED WASHER DIAMETER	0.818 INCHES MINIMUM AND
	0.828 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.113 INCHES MINIMUM AND
	0.133 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY	2
FIRST DIAMETER FROM HEAD	0.4985 INCHES MINIMUM AND
	0.4995 INCHES MAXIMUM
SECOND DIAMETER FROM HEAD	0.420 INCHES MINIMUM AND
	0.430 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER	2.590 INCHES MINIMUM AND
	2.610 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER	2.865 INCHES MINIMUM AND
	2.905 INCHES MAXIMUM
SPECIAL FEATURES	CADMIUM PLATE 0.0002 IN. MIN,0.0004 IN. MAX THK
TEST DATA DOCUMENT	81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THE MANUFACTURERS DATA
MANUFACTURERS CODE	97499
DESIGN CONTROL REFERENCE	204-011-171-3

Click here to Register for Free 30-day Trial