|
|
|
National Stock Number:
5306-00-960-5455
Federal Supply Class:
5306
National Item Identification Number:
009605455
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| BACB30-4C15 | 81205 | THE BOEING COMPANY | | BACB30BH4C15 | 81205 | THE BOEING COMPANY | | BACB30LJ4DU15 | 06710 | VALLEY-TODECO, INC. | | BACB30LJ4DU15 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30LJ4DU15 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LJ4DU15 | 17943 | FEDERAL MANUFACTURING CORP | | BACB30LJ4DU15 | 27624 | SPS TECHNOLOGIES LLC | | BACB30LJ4DU15 | 80539 | SPS TECHNOLOGIES, LLC | | BACB30LJ4DU15 | 81205 | THE BOEING COMPANY | | BACB30LJ4DU15 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LJ4DU15 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.186 INCHES MINIMUM AND 1.236 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 1.312 INCHES MINIMUM AND 1.342 INCHES MAXIMUM | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2496 INCHES MAXIMUM | | GRIP LENGTH | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM | | HEAD HEIGHT | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | HEAD STYLE | UNDERCUT HEXAGON | | HOLE CONFIGURATION STYLE | HEXAGON CORNERS | | HOLE DIAMETER | 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM | | HOLE QUANTITY | 3 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE | | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.389 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 28 |
|
|