5905-01-005-6709 RESISTOR,FIXED,FILM Index 5306-01-005-6711 BOLT,MACHINE

National Stock Number:
5306-01-005-6710

Federal Supply Class:
5306

National Item Identification Number:
010056710

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
MS20073-08-3096906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
FASTENER LENGTH3.031 INCHES MINIMUM AND 3.078 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
GRIP LENGTH2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
HOLE CONFIGURATION STYLEHEXAGON LONGITUDINAL HOLE
HOLE DIAMETER0.070 INCHES NOMINAL
HOLE QUANTITY6
HOLE TYPEDRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.500 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.765 INCHES MINIMUM AND 0.844 INCHES MAXIMUM
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNF
WIDTH BETWEEN FLATS0.741 INCHES MINIMUM AND 0.751 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us