|
|
|
National Stock Number:
5306-01-050-2616
Federal Supply Class:
5306
National Item Identification Number:
010502616
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 120978-9D27 | 56878 | SPS TECHNOLOGIES, LLC | | 120978-9D27 | 80539 | SPS TECHNOLOGIES, LLC | | AIC596-9D27 | 06725 | SPS TECHNOLOGIES, LLC | | C7521-9D27 | 81755 | LOCKHEED MARTIN CORPORATION | | 5306PL1496820 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 5306PL1721085 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | VCG0009-9D-27 | 06710 | VALLEY-TODECO, INC. | | VS3133-9D27 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | H411-9D27 | 17446 | HUCK INTERNATIONAL, INC | | PBF7521-9D27 | 27624 | SPS TECHNOLOGIES LLC | | VS3133-9D27 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | C7521-9D27 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.006 INCHES MINIMUM AND 2.026 INCHES MAXIMUM FIRST HOLE | | FASTENER LENGTH | 2.272 INCHES MINIMUM AND 2.292 INCHES MAXIMUM | | GRIP DIAMETER | 0.5607 INCHES MINIMUM AND 0.5616 INCHES MAXIMUM | | GRIP LENGTH | 1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM | | HEAD HEIGHT | 0.328 INCHES NOMINAL | | HEAD MINOR DIAMETER | 1.049 INCHES NOMINAL | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.562 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES NOMINAL FIRST HOLE | | SINGLE SHEAR STRENGTH | 132000 POUNDS PER SQUARE INCH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.594 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 18 |
|
|