|
|
|
National Stock Number:
5306-01-054-6231
Federal Supply Class:
5306
National Item Identification Number:
010546231
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 121933-6-24 | 56878 | SPS TECHNOLOGIES, LLC | | 121933-6-24 | 80539 | SPS TECHNOLOGIES, LLC | | ST3M750-6-24 | 56878 | SPS TECHNOLOGIES, LLC | | ST3M750-6-24 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.798 INCHES MINIMUM AND 1.828 INCHES MAXIMUM ALL HOLES | | FASTENER LENGTH | 1.932 INCHES MINIMUM AND 1.962 INCHES MAXIMUM | | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | GRIP LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM | | HEAD HEIGHT | 0.210 INCHES NOMINAL | | HEAD STYLE | DOUBLE HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE | | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD LENGTH | 0.447 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|