|
|
|
National Stock Number:
5306-01-056-5437
Federal Supply Class:
5306
National Item Identification Number:
010565437
Description:
BOLT,EYE
Detail:
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also BOLT, HOOK. Excludes CONNECTOR, ROD END.
|
Manufacturer Information:
| 802832-1 | 96214 | RAYTHEON COMPANY | | AN45-C11 | 81352 | AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.438 INCHES MINIMUM AND | | 0.516 INCHES MAXIMUM | | MATERIAL | STEEL COMP 431 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER | | EYE INSIDE DIAMETER | 0.313 INCHES MINIMUM AND | | 0.316 INCHES MAXIMUM | | SHOULDER THICKNESS | 0.078 INCHES MINIMUM AND | | 0.109 INCHES MAXIMUM | | SHANK LENGTH | 1.203 INCHES MINIMUM AND | | 1.250 INCHES MAXIMUM | | EYE STOCK THICKNESS | 0.183 INCHES MINIMUM AND | | 0.193 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.672 INCHES MINIMUM AND | | 0.703 INCHES MAXIMUM | | OVERALL LENGTH | 2.188 INCHES MINIMUM AND | | 2.235 INCHES MAXIMUM | | DISTANCE FROM CENTER OF EYE TO SHANK END | 1.946 INCHES MINIMUM AND | | 1.981 INCHES MAXIMUM | | EYE OUTSIDE WIDTH | 0.672 INCHES MINIMUM AND | | 0.703 INCHES MAXIMUM | | DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 1.094 INCHES MINIMUM AND | | 1.125 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.066 INCHES MINIMUM AND | | 0.086 INCHES MAXIMUM FIRST HOLE | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81352 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | AN45-C11 |
|
|