|
|
|
National Stock Number:
5306-01-081-1252
Federal Supply Class:
5306
National Item Identification Number:
010811252
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| AIC260E-10-40 | 06725 | SPS TECHNOLOGIES, LLC | | C305-10-40 | 27624 | SPS TECHNOLOGIES LLC | | C305-10-40 | 56878 | SPS TECHNOLOGIES, LLC | | C305-10-40 | 81755 | LOCKHEED MARTIN CORPORATION | | C305-10-40 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | EWB26-10-40 | 56878 | SPS TECHNOLOGIES, LLC | | EWB26-10-40 | 80539 | SPS TECHNOLOGIES, LLC | | VS2005-10-40 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VS2005-10-40 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| EXTENDED WASHER THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 1.185 INCHES MINIMUM AND 1.195 INCHES MAXIMUM | | FASTENER LENGTH | 3.637 INCHES MINIMUM AND 3.667 INCHES MAXIMUM | | GRIP DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | GRIP LENGTH | 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM | | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL | | HEAD HEIGHT | 0.663 INCHES MINIMUM AND 0.683 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS-6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | MINIMUM TENSILE STRENGTH | 260000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | WIDTH BETWEEN FLATS | 0.803 INCHES MINIMUM AND 0.814 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837 TY 2 CL 3 MIL SPEC 1ST TREATMENT RESPONSE OR AMS 2416 ASSN STD 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OR NICKEL AND CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 1.127 INCHES MINIMUM AND 1.177 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNJF |
|
|