5905-01-090-8612 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5306-01-090-8615 BOLT,MACHINE

National Stock Number:
5306-01-090-8613

Federal Supply Class:
5306

National Item Identification Number:
010908613

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
MS9158-2796906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
EXTENDED WASHER DIAMETER0.438 INCHES NOMINAL
EXTENDED WASHER THICKNESS0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
FASTENER LENGTH1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
GRIP LENGTH1.065 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH1250000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2485 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE TREATMENTOXIDE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.740 INCHES MINIMUM AND 0.820 INCHES MAXIMUM
THREAD QUANTITY PER INCH28
THREAD SERIES DESIGNATORUNF
WIDTH BETWEEN FLATS0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us